Doosan Puma TT1300SYY CNC Lathe, 2019

CAPACITY:
Swing over bed 175 mm (6.89")
Swing over carriage 175 mm (6.89")
Maximum turning diameter (upper turret) 175 mm (6.89")
Maximum turning diameter (lower turret) 175 mm (6.89")
Distance between left and right spindle nose 750 mm (29.5")
MAIN SPINDLE:
Maximum bar capacity 42 MM (1.65”)
Recommended chuck size 150 mm (6")
Spindle speed 6,000 rpm
Spindle nose A2-5
Left spindle draw tube ID 52 mm (2.047")
Spindle bore diameter 61 mm (2.4")
AC spindle motor (S3 25% rating) 11 kW (10 hp)
Maximum spindle torque (S3 25% rating) 116 Nm (86 ft-lb)
Max Bar Length (for bar feed application) 915 mm (36”)
MAIN SPINDLE C-AXIS:
Minimum programmable angle 0.001 degree
Rapid traverse rate (RPM) 600 rpm
C-axis repeatability±0.006 degree
C-axis positioning accuracy0.0167 degree
C-axis braking torque132 Nm (97 ft-lb)
RIGHT SPINDLE:
A axis travel (right spindle) 540 mm (21.26")
Spindle speed 6,000 rpm
Spindle nose A2-5
Draw tube ID 40 mm (1.57")
Spindle bore diameter 53 mm (2.08")
AC spindle motor S3 25% rating 11 kW (15 hp)
Maximum spindle torque (S3 25% rating) 93 Nm (69 ft-lbs)
Standard chuck size 135 mm (5.0")
C-AXIS – RIGHT SPINDLE:
Minimum programmable angle (degrees)0.001 deg

Rapid traverse rate600 rpm
C-axis repeatability±0.006 deg
C-axis positioning accuracy0.0167 deg
Y-AXIS (Upper & Lower Turret):
Y-axis travel (total) 80 mm (±40mm) (3.15" (±1.57”))
Y-axis travel (above center) 40 mm (1.57")
Y-axis travel (below center) 40 mm (1.57")
Y-axis rapid traverse rate 15 m/min (590 ipm)
Y-axis repeatability ±0.002 mm (±0.00008")
Y-axis feed thrust (continuous) 7,574 N (1,702 lb)
Y-axis feed thrust (intermittent) 12,118 N (2,724 lb)
BED, SADDLE & CROSS SLIDE:
Angle of slant bed 45-degree
X1 axis travel 135 mm (5.31")
Z1 axis travel 530 mm (20.86")
X2 axis travel 135 mm (5.3")
Z2 axis travel 530 mm (20.86")
X axis rapid traverse rate 30 m/min (1,181 ipm)
Z axis rapid traverse rate 40 m/min (1,575 ipm)
X axis ball screw diameter 32 mm (1.26")
Z axis ball screw diameter 32 mm (1.26")
X1 axis feed thrust (continuous) 8,451 N (1,890 lb)
X1 axis feed thrust (intermittent) 11,832 N (2,660 lb)
Z1 axis feed thrust (continuous) 5,634 N (1,266 lb)
Z1 axis feed thrust (intermittent) 7,888 N (1,773 lb)
X2 axis feed thrust (continuous) 7,606 N (1,709 lb)
X2 axis feed thrust (intermittent) 10,649 N (2,394 lb)
Z2 axis feed thrust (continuous) 5,634 N (1,266 lbs)
Z2 axis feed thrust (intermittent) 7,888 N (1,773 lb)
A axis feed thrust (continuous) 5,634 N (1,266 lb)
A axis feed thrust (intermittent) 7,888 N (1,773 lb)
X axis repeatability ±0.002 mm (±0.00008")
Z axis repeatability ±0.003 mm (±0.00012")
TURRETS:
Turret Stations 12 + 12
Turret indexing positions 24 + 24
Tool holder type BMT-45
Turning tool shank size (metric turret 20 mm) .75"
Boring bar diameter (metric turret 25 mm) 1.0"
Turret index time (next station swivel time) 0.1 second
Tool selection Bi-directional
Turret index repeatability ±0.0005 degree
ROTARY TOOLS BOTH TURRETS:
Rotating tool RPM 6,000 rpm
Rotating tool spindle motor (S3 25% rating) 3.7 kW (5 hp)
Rotating tool torque (S3 25% rating) 23.5 Nm (17 ft-lb)
Rotating tool collet type ER 20
Milling collet capacity 3/32 to 1/2"

COOLANT SYSTEM:
Coolant pump pressure 4.5 bar (65 psi)
Coolant pump motor .75 kW (1.0 hp)
Coolant tank capacity 430 l (113 gal)
HYDRAULIC / LUBRICATION:
Hydraulic tank capacity 32 l (8.4 gal)
Hydraulic oil required* Mobil DTE #24 or Shell Tellus 32
Way lubrication tank capacity 2 l (.5 gal)
Way lubrication oil required* Mobil Vactra #2 or Shell Tonna T68
Way lubrication grease capacity .7 l (.18 gal)
Way lubrication grease required* ISO VG97
* Cross reference these numbers for other brands
GENERAL:
Machine weight 8,100 kg (17,860 lb)
Floor space - length x width 3,510 mm x 2,300 mm (138" x 90.5")
Floor space - length with hinge belt chip conveyor 4,455 mm (176")
Machine Height 2,070 mm (81.5")
Height from floor to spindle center 1,160 mm (45.67")
Voltage 205-235V/3 ph/60 Hz
Power requirement 52 kVA (136 Amps @ 220 Volts)

All specifications are assumed to be correct but must be confirmed by the purchasing entity.